Home  >  Laser Diode Controllers  >  Maiman Electronics LLC  >  RLS/SF8300-ZIF14


3000mA Pump Laser Diode Controller OEM Module with 16 W TEC/Temperature Controller and Butterfly ZIF Socket

  • 3000mA Butterfly Laser Diode Controller OEM Module
  • 3A Maiman Laser Controller Module with ZIF Butterfly Socket
  • Maiman Controller Pinout and Dimensions
  • Maiman Laser Diode Module Setup Diagram
  • Maiman Laser Controller Module Software Image

sku / item#: RLS/SF8300-ZIF14
ships: 2 to 3 Weeks

Key Features
  • Optimized for Pump Laser Diodes
  • Soft-Start Current Ramp, Current Limit and Temperature Limit for Laser Diode Protection
  • 3 Amp Laser Diode Bias Current Range
  • 16 Watt Laser Diode TEC Controller
  • Pre-Wired Azimuth ZIF Socket for Butterfly Mounting
  • Integrated PID controller
  • Free GUI Control Software
  • Offered by Maiman Electronics, a Laser Lab Source Marketplace Seller
  • Sold & Supported in North America by: LaserDiodeControl.com, part of the
    Laser Lab Source Marketplace Group

Price and Delivery Quote

Buy Now / Add to Cart

Technical Questions for this Product


Customers Also Considered:

Why do Scientists & Engineers Choose Laser Lab Source?

PRICE $785.00
  • Laser Diode Bias Output Current Range (I): 0 ~ 3,000 mА
  • Laser Diode Bias Compliance voltage range (V): 3 V
  • Current Stability: 0.1 %
  • Current Set-Point Accuracy: < +/- 1 %
  • Current Noise: 10-15 µA
  • ТЕС Output Current Range: 0 ~ ±4 А
  • TEC Output Voltage Range: ) 0 ~ ±4 V
  • TEC Output Current Ripple: 2 ~ 4 mА
  • TEC Feedback Sensor: 10 kOhm Thermistor
  • Temperature Control Range: +15 to +40 °C
Laser Diode Protection
  • Soft-Start Current Ramp
  • Current limit
  • Temperature limit
  • Reverse current protection
  • ESD and transient protection
  • Dimensions: 101.6 x 61 x 28.3 mm
  • Weight: 142 g
  • Trim Potentiometers for Driver Current and TEC Power
  • Analog
  • RS-232 / UART/ USB
  • Input Voltage Supply (Vin): 5 VDC
  • SF8300
  • 50 cm ribbon cable with one 8-pin connector – 1 pcs
  • 50 cm ribbon cable with one 20-pin connector – 1 pcs
  • Datasheet & User Manual – 1 pcs
  • USB-UART converter – 1 pcs
  • 1-year manufacturer's warranty

Product Overview:

3 Amp Controller for Pump Laser Diodes Overview

These 3 amp low noise laser diode controllers with butterfly mounting sockets are designed to power and control the temperature of butterfly packaged devices. They are optimized for precision control of pump laser diodes from manufacturer's such as 3SP Technologies, Lumentum and II-VI. They come with a pre-wired mounting socket for butterfly packaged devices and also include a zero insertion force socket with clamping arms. These controllers are an excellent choice for product integration or for an affordable solution to laboratory test set-ups. These modules are also available with no Azimuth connector in a lower cost direct solder version.

Fast, Simple Set-Up and Control

The SF series laser diode control and mounting modules are simple to set-up and operate. They can be configured through adjustment trim potentionmeters, a USB / UART connector or an analog control signal connector. They require a separate 5VDC power supply (user supplied).

  • Small Footprint Precision Laser Diode Controller

    These modules are the smallest footprint controller which is commercially available. Careful selection of components and and exacting design criteria allows the modules to provide complete control of your pump laser in a 61mm x 101mm package. They have a 10mm thick aluminum base plate which provides excellent heat dissipation and keeps the laser diode safely operating within your desired operating temperature range. The module base plate comes with 4 mounting through-holes, 3.2mm each, to bolt the module directly to an instrument chassis or any thermally conductive surface.

    Multiple Layers of Laser Diode Protection

    These controllers are designed to provide a series of protection features to ensure the safety of your laser diode. The module ships with a jumper which shunt the LD bias current path of the driver to protect the laser diode from any ESD / static discharges when a user is installing the diode into the mounting socket. This shunt also protects the laser when the user is connecting the DC power, the control connector or any other external equipment. An integrated reverse diode protects the laser diode from any possibility of damage from reverse current and reverse voltage. The user can set a current limit and temperature limit through the analog control connector port on through the on-board trim potentiometers. These controllers also offer a ~ 900 millisecond soft-start ramp to the current set point to avoid the potential for thermal shock to the laser.

    View SF8300 Series Model with solder pads.

    Why do Scientists & Engineers Choose Laser Lab Source?

    • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

    • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

    • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability