Opt Lasers is a brand of Tomorrow’s System Sp. z o.o. (LTD company) located in Poland. Before the company was established in 2014, it had been an “Opt Laser” startup for 2 years that achieved remarkable success selling products both in domestic as well as international markets. Cooperation with many companies led to the creation of a few laser and electronics devices which were rare on the market. Starting from a single person, the company is now created by a team of young but already experienced engineers who share their passion to optics, mechanics, electronics and new technologies. We offer laser solutions in various fields: - One of the leading products developed by Opt Lasers are laser diode engraving heads which can be used in every machine, even the smallest ones. Laser diode engraving heads are a great substitute for those who need an economical, small size and still powerful solution. - The second type of products are laser modules.
-
TO-5 brass Laser Diode Housing Mount
- TO-Can
- Air Cooled
- TO-5 Brass Housing Mount
- 15mm Beam Height from Base
- Excellent Thermal Dissipation - $59.00
-
5 Amp Laser Driver Circuit; Compliance Voltage Range up to 12 Volts; Designed for Blue and Green Laser Diodes
- 5 Amps
- 12 Volts
- - PCB Laser Diode Driver Circuit for Blue and Green Laser Diodes
- Current Limit for Laser Protection - $195.00
-
20 A OEM TEC Controller, PID Control Loop
- 100 Watts
- 20 Amps
- TEC Controller with PID Loop
- Maximum Current of 20 Amps
- Pre-Programmed PID Parameters - $249.00
-
5.6mm, TO-18 Packaged Laser Diode Brass Housing Mount
- TO-Can
- Air Cooled
- Brass 5.6mm TO-18 Mount
- Back Mounted PCB Plate
- Clamping Plate included - $59.00
-
60 Amp Low Cost, High Power Laser Diode Driver Circuit
- 60 Amps
- 4 Volts
- Low Cost High Power Laser Diode Driver
- Up to 200 Watts Output Power
- Fully Potted in Aluminum Case
- 95 x 50 x 30mm Size - $450.00
-
1 Amp x 3 Channel Laser Diode Driver
- 1 Amps
- 5 Volts
- 3 Current Source Outputs; Laser Driver Circuit- Three Separate 1A Outputs- Trim Pot Current Adjustment
- $375.00
-
120W Output Power TEC Controller Board; Simple to Operate Controller Provides High-Stability Temperature Control
- 120 Watts
- 8 Amps
- TEC Controller Board
- Safety Features Help Protect Laser Diode
- Temp Stabilization Accuracy: ±0.2 °C
- Small Footprint: 45 mm x 60 mm - $249.00
-
Water Cooling Module
- Multi-Function
- Water Cooled
- Water Cooling Mount Plate
- Precision Machined Aluminum
- Compact Size - $195.00
-
5 Amp, 48 Volt OEM Laser Driver Circuit PCB for Running Multiple Laser Diodes in Series
- 5 Amps
- 48 Volts
- OEM High Voltage Laser Diode Driver
- Max Power Dissipation of 30 W
- Fully Potted in Aluminum Case
- Adjustable Current Limit - $750.00
-
5 Amp, 10 Watt OEM Laser Diode Controller, Low Cost
- 5 Amps
- 12 Volts
- 10 Watts
- Low Cost OEM Driver with Heatsink
- Soft-Start Ramp Up To Set-Point
- PWM, Cooling-Only TEC Controller
- Digital PID Control - $375.00
-
5 Amp, 35 Volt Board-Level Laser Diode Driver with Heat Sink / Affordable High Voltage Laser Diode Driver
- 5 Amps
- 35 Volts
- 10 Watts
- High Compliance Voltage PCB Driver
- Affordable and Compact
- Integrated Protection Circuit, Soft-Start
- Soft-Start Ramp to Set-Point - $249.00
-
288 Watt Advanced TEC Controller
- 288 Watts
- 12 Amps
- Advanced TEC Controller, 288 Watts
- 288 Watt Heat
- Adjustable Temperature Cycles - $649.00