20 Amp Driver For Laser Diodes, PicoLAS Model LDP-CW 20-50

LDP-CW 20-50 Driver

The LDP-CW 20-50 is a compact and efficient current supply designed for high power laser diodes. With a maximum output power of 1 kW, it offers a wide range of output current from 1 to 20 A and a compliance voltage of 0 to 50 V. Equipped with several protective features and a half brick size design, it is an affordable and reliable solution for laser soldering, welding, surface treatment, and show lasers.
______________________________________________________________

Specifications and Key Features
- Output current: 1 .. 20 A
- Compliance voltage: 0 .. 50 V
- Output power: 1 kW
- Coverage of cw range
- Analog modulation
- Half brick size (35 cm²)
- Several protective features
- High efficiency
- Current ripple < 1%
- Ripple frequency > 1 MHz
- Current overshoot: Refer to manual
- Analog modulation (10 A pp): Refer to manual
- Current settling time (full-scale): Analog or digital
- Current setting input: 12
- Supply voltage: 55 V DC (min. 5 V above laser diode voltage)
- Max. power dissipation: < 45 W
- Dimensions in mm: 60.9 x 57.8 x 29
- Weight: 194 g
- Operating temperature: 0 to +55 °C

Note that technical data is subject to change without further notice, and actual values may depend on hardware setup.