Home  >  Laser Diode Drivers  >  Eblana Photonics  

 

500mA Laser Diode Driver, LDC/E-Current500

$1462.00   Ships: Contact | Model

Key Features
  • Current Range: 0-500 mA
  • Ultra-high resolution with 20 bits DAC
  • Ultra-low noise (down to 300 pA/rtHz noise floor)
  • Floating output system
  • Compatible with all laser diode configurations
  • Ultra-high resolution anode-cathode voltage readout
  • Integrated laser diode safety features
  • Constant current and voltage operation
  • Soft panel GUI
  • OEM versions available

Price and Delivery Quote

You will receive factory-direct price with no mark-ups

Technical Questions for this Product

ASK AN ENGINEER

Questions route directly to the correct Product Engineer

Why do Scientists & Engineers Choose Laser Lab Source?

  • NO SALES PERSON. Get direct access to the correct product ENGINEER. learn more »

  • NO MARK-UP's. Manufacturer's set their own lowest direct pricing. learn more »

  • LEADING BRANDS. We make it simple to buy from top Global suppliers. learn more »

Customers Also Considered:

MODEL
PRICE $1462.00
Output current
  • Output current range: 0-500 mA
  • Compliance voltage: 0.5 μA
  • Relative accuracy: ±0.5 μA
  • Ripple: <2 μA
  • Current noise density: down to 300 pA/rtHz
  • Long term stability: <6 μA
  • Polarity: Floating output
Laser voltage measurement
  • Measurement: 4-wire
  • Measurement range: -5 to 5 V
  • Resolution: Sigma delta 24 bits. 0.3 μV
  • Accuracy: 0.0005%
  • Noise: Down to 0.2 μV (RMS, with 50/60 Hz rejection)
General
  • Operating temperature: 0 to 40 ºC
  • Storage temperature: -40 to 70 ºC
  • Dimensions: 3U height, 4 HP width, 160 mm depth
  • Connector: D-SUB9 (female)
  • Format: VME 160 mm depth
  • Protection features: Output short circuit at laser off, Open output detection
Laser Modulation
  • External: Available on laser mount

Product Overview:

Eblana Photonics is delighted to offer the LDC/E series. The LDC/E-Current500 driver module has high current resolution, ultra-low noise and high-resolution ADC (Analog to Digital Converters). This allows accurate measurements of the anode-cathode voltage, which is especially useful for optical power measurements where no monitor photodiode is present and for injection locking applications. A 200mA system is also available. OEM versions are available for integration into remote and potentiometer-based controls. LDC/E series are modules used with our smart chassis products (chassis/xxHP and SOM/E)

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability