Home  >  Nanosecond Pulsed Laser Diode Drivers  >  ALPhANOV  >  CCS-CENTRAL-T1

 

Two Channel Laser Diode Control and Butterfly Mount Module for Fiber Lasers

  • Laboratory Image Engineer Pulsing a Laser Diode

$3995.00   ships: 3 weeks | item#: CCS-CENTRAL-T1

Key Features
  • One channel pulsed/CW for fiber laser seed; second channel CW for fiber laser pump
  • Compatible with all fiber laser architectures: mode-locked, Q-Switch, MOPA with any oscillator, EOM modulation, gain switch
  • Pulsed channel offers adjustable pulse width from 1 nanosecond to CW
  • USB interface or analog voltage signal remote control

Price and Delivery Quote

You will receive factory-direct price with no mark-ups

Technical Questions for this Product

ASK AN ENGINEER

Questions route directly to the correct Product Engineer

Customers Also Considered:

Why do Scientists & Engineers Choose Laser Lab Source?

MODEL CCS-CENTRAL-T1
PRICE $3995.00
PULSED / CW CURRENT CHANNEL
  • Output Current Pulsed Channel: 0.00 to 3.5 Amps
  • User Adjustable Internal Pulse Generator Range: 1ns to 500ns
  • External Trigger Pulse Width Acceptable Range: 1ns - CW
  • Internal Pulse Generator Adjustment Precision: 10psec
  • Internal Pulse Generator Repetition Rate Range: 1Hz to 250MHz
  • Output Voltage Maximum: 4.8 Volts
  • Temperature Conrol Stability: <10mK
  • Alarms/interlock response time: 2µsec
  • Current Noise (rms): 0.03%
CW CURRENT CHANNEL
  • Output Current CW Channel: 0.00 mA to 1500.00 mA
  • Noise level: 0.03% rms (full scale)
  • Setpoint Resolution: 0.05mA
  • Output Voltage Maximum: 4.8 Volts
  • Temperature Conrol Stability: <10mK
  • Alarms/interlock response time: 2µsec
  • Current Noise (rms); 0.03%
PHYSICAL DIMENSIONS
  • 210mm (L) x 123mm (W) x 37mm(H)
user INTERFACE and power input
  • Remote I/O: USB with GUI and software integration libraries
  • Analog (0-5V) Remote Signal Peak Power Adjustment
  • Input Power Supply: 24VDC (optional, not included)

Product Overview:

Laser Diode Controller with Multiple Integrated Fiber Laser Control Functions:

The CCS-CENTRAL module was developed specifically to shorten the development time and reduce the costs associated with the manufacturing of fiber lasers. These modules integrate two laser diode drivers, 6 photodiode measurement/control circuits, a pulse-picker synchronization tool and multiple other fiber laser control functions. They are compatible with almost all fiber laser architectures: Mode-locked, Q-Switch, MOPA with any oscillator, EOM modulation, Gain Switch, Microchip etc.

Control Electronics for Pulsed Seed & CW Pump Laser Diodes:

The CCS-CENTRAL includes one pulsed / CW channel for a seed laser diode and one CW channel for a pump laser diode. They provide a simple way to control the multiple security stage ON/OFF requirements of complex multistage fiber lasers. Their response time, low noise, resolution and interlocks have been optimized for the requirements of seed & pump lasers used in fiber lasers. The pulse driver current range is up to 3.5 amps in pulsed mode, and the current range is 1.5 amps in continuous wave mode. Pulse generation is done internally using an internal function generator, or pulses can be delivered from an external source to the SMA connector on the side panel. High repetition rates are available up to 250 MHz. These modules offer a USB interface.

Key Features:

  • 1 butterfly laser diode controller with mount, CW up to 1.5 Amps, very low noise floor

  • 1 butterfly laser diode controller with mount, PULSED up to 3.5 Amps, 1 nsec to CW with internal pulse duration and repetition rate adjustments

  • 2 photodiodes to measure CW optical power with high precision

  • 1 photodiode to measure the repetition rate of an optical signal

  • 2 photodiodes to measure the average optical power of a pulsed signal

  • 1 photodiode to measure the optical back reflected power in CW or pulse regime

  • 20 different alarms with potential interlock effects

  • Dedicated pump pulse regimes for low repetition rate or pulse-on-demand configurations

    • Why do Scientists & Engineers Choose Laser Lab Source?

    • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

    • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

    • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability